Artikelnr: 21243

23" VA-Panel, 2 MP (1920 x 1080 Pixel), 16:9, 300 cd/m², Kontrast 3000:1

CHF 605.00inkl. 7.7% MwSt./vRG

CHF 396.00inkl. 7.7% MwSt./vRG

Ist demnächst lieferbar

+41 44 782 24 40
info (at)
Scroll to Top

This 23-inch clinical review monitor featuring a DICOM-preset mode is a cost-efficient alternative to fully-fledged diagnostic monitors for hospital information systems (HIS). With next-generation features like a DisplayPort input and a presence sensor that automatically switches the monitor to power save mode when you are away from your desk, the MS230W offers you tomorrow's technology today.

Ist demnächst lieferbar

+41 44 782 24 40
info (at)

DICOM Preset Modes
MS models feature a DICOM preset mode whose grayscale tone is preset on the production line for reviewing medical images with patient charting applications.

Presence Sensor for Power Savings
The presence sensor feature unites convenience with savings by ensuring that the monitor conserves power when it is not in use. The presence sensor prompts the monitor to switch to power save mode when it detects the user is away from the monitor, and then resume normal operation when the user returns. 

Handy Partitioning for Widescreen Monitor and Multi-Monitor Environments
EIZO ScreenSlicer is a monitor software utility that allows an entire screen to be effectively used though partitioning. Multiple windows can be easily aligned and dropped into the partitioned areas in single- or multi-monitor environments for convenience.

Thinner and Lighter
To reduce environmental burden at each stage of the monitor's life cycle, EIZO reduced the number of internal components and redesigned the monitor's body. The resultant ultra-slim cabinet is 48% thinner and 41% lighter than a previous EIZO 24-inch widescreen monitor and lets it ship in a smaller container with significantly less packaging.

Ergonomic Design for Improved Operability and Less Fatigue
The height, swivel, and tilt adjustable stand offers added flexibility and viewing comfort.

View More with Widescreen
The widescreen 16:10 or 16:9 aspect ratio provides significantly more horizontal space than the 4:3 or 5:4 aspect ratios of conventional square monitors. The screen is wide enough so that you can keep tool palettes open without covering the window you're working on.

Brightness Stabilization
At startup or upon wakeup, the EIZO patented drift correction function quickly stabilizes the brightness level. In addition, a sensor measures the backlight brightness and compensates for brightness fluctuations caused by the ambient temperature and the passage of time. 

Mode Selection for Optimum Viewing
Selectable with the front panel buttons, the CAL Switch function allows for various calibration modes of different modalities such as CR, CT, and endoscope images. Furthermore, auto mode settings can be made with the Auto CAL Switch function. 

Energy Efficiency Gauge
To encourage environmental consciousness while working, an on-screen gauge indicates energy consumption in correlation with the screen's brightness. When the gauge is fully illuminated, the monitor is operating at optimum energy efficiency. 

Next Generation Connectivity
Next-generation DisplayPort connectivity allows signal information transmission via a single, high-bandwidth cable at distances up to 15 meters without any signal degradation.

Sicherheit durch Einhaltung medizinischer Standards

Der Monitor erfüllt strengste medizinische Sicherheits- und EMV-Standards.

AusstattungMit Standfuss
Diagonale23" / 58 cm (584 mm diagonal)
Ideale und empfohlene Auflösung1920 x 1080
Auflösung in MP2 MP
Sichtbare Bildgrösse (B x H)509.7 x 286.7 mm
Punktabstand0.2655 x 0.2655 mm
Darstellbare Farben8-Bit: 16.77 Millionen aus 1.06 Milliarden
Maximaler Blickwinkel (H/V)178° / 178°
Maximale Helligkeit300 cd/m²
Typische Reaktionszeit25 ms
Signaleingänge1x DVI-D, 1x D-Sub mini 15pin, 1x DisplayPort
Digitale Frequenz (H/V)31-68 kHz, 59-61 Hz (VGA Text: 69-71 Hz)
Analoge Frequenz (H/V)31-81 kHz, 55-76 Hz
Sync FormateSeparate
Upstream Ports1 Port
Downstream Ports2 Ports
StandardUSB 2.0
StromversorgungAC 100-120 V / 200-240 V, 50/60 Hz
Stromverbrauch max.45 W
Stromverbrauch im Stromspar-Modus< 1 W
Power ManagementVESA DPM, DVI DMPM, DisplayPort Version 1.1a
SensorenBacklight-Sensor, Umgebungslicht-Sensor
Voreingestellte Farb-/Graustufen-ModiDICOM, CAL Switch
OSD-SprachenDeutsch, Englisch, Französisch, Italienisch, Spanisch, Japanisch, Schwedisch, vereinfachtes Chinesisch, traditionelles Chinesisch
Gewicht mit Standfuss7.1 kg
Gewicht ohne Standfuss4.3 kg
Lochabstand (VESA Standard)100 x 100 mm
PrüfzeichenCE, VCCI-B, FCC-B, ICES-003-B (CAN), C-Tick, RoHS
Garantie3 Jahre
LieferumfangCH-Stromkabel, Signalkabel (DVI-D – DVI-D), Signalkabel (DisplayPort – DisplayPort), USB 2.0-Kabel, PDF-Handbuch, Reinigungstuch