Numéro d'article: 21909
Prix sur demande
CuratOR – Reliable Technology from a Single Source
EIZOWith CuratOR, EIZO offers complete solutions for the integrated OR and the control room. This means there are no limits in terms of developing solutions thanks to the comprehensive EIZO product line.
Please contact us for a non-binding consultation.
Display surgical images in 4K UHD high resolution
The EX3140 has a resolution of 3840 x 2160 pixels, which is four times the size of a full HD monitor. 4K UHD endoscope and microscope images can be reproduced in high definition. Easily see fine details that are otherwise difficult to distinguish on full HD monitors.
View large images in Full HD
When inputting 4K UHD signal, even if an area of the screen is magnified using the zoom function, it is possible to display the area with a resolution equal to or higher than full HD.
Flawless picture reproduction
The use of state-of-the-art LCD technology allows distortion-free image geometry. The applied TFT panel enables a very large viewing angle and high brightness. The EX5841 provides a flickerfree picture, even at low refresh rates, thereby adhering to the strictest ergonomic requirements.
In consideration of safety, EIZO's surgical monitors adopt rounded corners. The front is covered with a fully flat protective glass that is dustproof and waterproof (monitor front: IP45, overall: IP32).
Viewing Multiple Signals on One Screen
In dual source mode, two separate signal sources can be viewed simultaneously on one monitor screen side-by-side using the PaP (Picture-and-Picture) function. With the PiP (Picture-in-Picture) function a second signal can be displayed above the main signal. The size and position of the display window is adjustable when using PiP. In triple source mode, three signal sources can be displayed on the monitor screen, representing a third signal above two signals displayed side-by-side. This is useful when several images need to be viewed at once such as multiple modalities.
Various input/output signal support
The monitor supports various video input and output signals for connecting to different types of modality equipment. Furthermore, a communication interface allows image switching by external surgical equipment.
4K UHD connection with only one cable
With 12G-SDI (BNC), DisplayPort 1.2, and HDMI, 4K UHD signals can be displayed at up to 60 frames per second with a single cable. Furthermore, all cables can be locked onto the monitor for consistent connection. With the 12G-SDI (BNC) terminal, stable transmission is possible even over long distances of up to 30 m.
Preset Functions for Easy Switching
Various setting such as the input terminal selection, brightness, grayscale tones, color gamut, etc., can be stored in the monitor as preset functions. These settings can be named according to operators’ preferences through easy operation of the preset button.
Comfortably view from any angle
It has a viewing angle of 178 degrees so images can be viewed from various directions with minimal changes in contrast.
VESA compliance to be attached to existing mounting accessories.
Rest assured with medical qualifications
The monitor meets the strictest medical, safety, and EMC emission standards.
|Technologie du panneau||IPS|
|Diagonale||58" / 147.3 cm (1473 mm diagonal)|
|Résolution native||3840 x 2160 (4K UHD)|
|Taille d'affichage active (l x h)||1270 x 721 mm|
|Espacement des pixels||0.331 x 0.334 mm|
|Couleurs d'affichage||10-Bit (SDI/DisplayPort): 1.07 milliards (maximum), 8-Bit: 16.77 millions|
|Angle de vision maximal (h/v)||178° / 178°|
|Luminosité maximale||500 cd/m²|
|Temps de réponse, rise/fall||9.5 ms (ton moyen)|
|Connexion d'entrée||1x DisplayPort, 1x DVI (single link), 1x HDMI, 1x BNC (12G-SDI)|
|Output Terminals||1x BNC (12G-SDI)|
|Fréquence numérique (h/v)||27-135 kHz, 24-60 Hz|
|Ports upstream||USB 2.0: Type-B Hub|
|Ports downstream||2 ports (USB 2.0 type A), USB 2.0: Type-A for service|
|Alimentation||AC 100-240 V, 50/60 Hz|
|Consommation d'électricité max.||200 W|
|Consommation en mode d'économie d'énergie||0 W (power switch off), < 20 W (external power off), < 35 W (external power on)|
|Consommation d'énergie interrupteur du réseau (off)||0 W|
|Possibilités de réglage||Picture-in-Picture, Picture-and-Picture|
|Dimensions (sans pied, l x h x p)||1329 x 780 x 89 mm|
|Poid sans pied||45 kg|
|Espacement des trous de montage (Standard VESA)||400 x 200 mm, 400 x 400 mm|
|IP Rating / Indice de protection||IP45 (front), IP32 (arrière)|
|Marque de contrôle||CE (Medical Device Directive), ANSI/AAMI ES60601-1, IEC/EN60601-1, CAN/CSA C22.2 No. 601.1, EN60601-1-2, FCC-B, RCM, RoHS, China RoHS, WEEE, EN60601-1-2 Class B|
|FDA 510(k) Officialisation||Class I|
|Contenu de la livraison||4 vis de fixation, AC power cord, Utility Disk (instructions d'emploi PDF)|