
LX491W
Numéro d'article: 21822
Prix sur demande
This 49” widescreen monitor is ideally suited for viewing medical images under OR conditions. Numerous input and output signals, image combination capabilities, and gamma models pre-calibrated at the factory enable its use within the widest range of applications. With its fan-free design and water-tight, easy to clean front, the monitor is perfectly suited for sterile hospital environments.
- Five factory-set look up tables according to DICOM and Gamma 2.2 for optimal image reproduction
- Fast adaptation to various environments and procedures
- Numerous video inputs and outputs for increased connectivity
- Flexible image arrangement thanks to the Picture-in-Picture (PiP) and Picture-at-Picture (PaP) functions
- Fully automated brightness stability using ISS (Integrated Stability System)
CuratOR – Reliable Technology from a Single Source
EIZOWith CuratOR, EIZO offers complete solutions for the integrated OR and the control room. This means there are no limits in terms of developing solutions thanks to the comprehensive EIZO product line.
Learn more about: CuratOR Complete Solutions and CuratOR Case Studies
Please contact us for a non-binding consultation.

Large display area
With an image diagonal of 49” and a resolution of 1920 x 1080 pixels, the monitor is suited for displaying different image sources simultaneously. For example, DICOM X-rays and endoscopic images can be shown side-by-side in the surgical environment. The large image diagonal makes the monitor ideal for mounting on the OP wall and viewing images from a greater distance. Images can be scaled full screen, reproduced in their original size, or displayed in or next to one another with the PiP and PaP functions.
Flexible usage
The monitor supports a wide spectrum of timings and can be adapted easily to the various signal requirements in the operating room. Together with its numerous input and output connectors, the monitor can be used in a variety of ways with established imaging systems. Depending on the procedure and requirements, users for example can quickly switch between endoscopic images, X-ray images in DICOM, and modality images with specialized timing, or combine these with other images.

Preset look-up tables (LUT)
The monitor is pre-calibrated in the factory. With five applicationoriented look-up table (LUT) presets and a user-configurable LUT function, the monitor is easy to install and maintain. It can be quickly adapted to the local viewing and lighting conditions or application preferences as needed.
User-defined LUT function
With the user-defined look up table (LUT), the default gamma model, color coordinates, and brightness of the LX491W can be adapted to individual requirements without additional sensors and software. With Force Mode, even the unknown timing of an older medical system can be analyzed and implemented in the monitor. As a result, even timing outside the standard range can be displayed on the monitor. This ensures compatibility, especially with older medical systems. And adaptations in the field, for example when replacing a device, become very easy.
Numerous video inputs
The LX491W can be connected to imaging systems via the various video inputs, such as DVI, 3G-SDI, Composite, S-Video and VGA. The monitor can be simultaneously connected to both digital and traditional video signals (PAL, NTSC). If necessary, the video input settings can be adjusted using the OSD (On Screen Display) menu.

Simultaneous display of different image sources
Thanks to the monitor’s widescreen format, the various input signals can be displayed in “picture-in-picture” (PiP) or side by side (PaP) orientations. This reduces the need for additional monitors, allowing users to view critical source image while simultaneously maintaining a view over other vital information.

Laminated safety slass for easy cleaning
The anti-reflective laminated safety glass ensures excellent image quality while protecting the monitor from scratch damage or liquid ingress during surgery or when cleaning and disinfecting the monitor.
Keep your monitor lit longer with LED backlight
By utilizing an energy-efficient LED as a backlight, the monitor achieves a high-brightness and low power consumption at the same time. Unlike conventional CCFL technology, LED backlighting offers a longer monitor lifespan, is free of hazardous materials, and is therefore compliant with current environmental regulations.

View accurate images in moments
The EIZO-patented drift correction function quickly stabilizes the brightness level of the monitor upon startup of wakeup from sleep mode, giving you the most accurate images quickly ready for viewing. In addition, a sensor measures the backlight brightness and automatically compensates for brightness fluctuations caused by ambient temperature and aging for a consistently stable display.

Fanless silent design
Engineered to dissipate heat without a fan, the monitor generates no distracting noises and does not circulate dust and germs or disturb the controlled laminar airflow within the operating room.


Rest assured with medical qualifications
The monitor meets the strictest medical, safety, and EMC emission standards.

Boîtier
Couleur | Blanc |
Dalle
Technologie du panneau | IPS |
Rétroéclairage | LED |
Diagonale | 48.5" / 123 cm (1232 mm diagonal) |
Résolution native | 1920 x 1080 |
Format | 16:9 |
Taille d'affichage active (l x h) | 1073.8 x 604 mm |
Espacement des pixels | 0.5593 x 0.5593 mm |
Couleurs d'affichage | 8-Bit: 16.77 millions |
Angle de vision maximal (h/v) | 178° / 178° |
Luminosité maximale | 700 cd/m² |
Contraste | 1300:1 |
Temps de réponse, rise/fall | 8 ms (Grau/Grau) |
Signaux vidéo
Connexion d'entrée | 1x DVI-I, 1x DVI-D, 1x BNC (3G-SDI), 1x BNC (Composite), 1x D-Sub mini 15pin, 1x S-Video (mini DIN) |
Output Terminals | 1x BNC (3G-SDI), 1x BNC (Composite), 1x S-Video, 1x D-Sub Mini 15pin |
Fréquence numérique (h/v) | 30 - 91 kHz / 48 - 85 Hz |
Fréquence analogique (h/v) | 30 - 91 kHz / 48 - 85 Hz |
Format Sync | Composite, Separate, Sync-on-Green |
USB
Ports upstream | USB 2.0: Type B |
Ports downstream | 2 ports (USB 2.0 type A) |
Spécifications électriques
Alimentation | AC 100-240 V, 50/60 Hz |
Consommation d'électricité max. | 144 W |
Consommation d'électricité moyenne | 85 W |
Consommation en mode d'économie d'énergie | 19 W |
Power Management | DVI DMPM |
Capteurs
Capteurs | Détecteur du rétro-éclairage |
Équipement et fonctions
Possibilités de réglage | User defined LUT function, Force Mode, Picture-in-Picture, Picture-and-Picture, PoP (source preview) |
Langues OSD | allemand, anglais |
Ergonomie, dimensions et poids
Dimensions (encastrement frontal, l x h x p) | 1103 x 634 x 80.9 mm |
Poid (encastrement frontal) | 31 kg |
Espacement des trous de montage (Standard VESA) | 400 x 200 mm |
Caractéristiques environnementales
IP Rating / Indice de protection | Frontseite IP65, Rückseite IP20 |
Certificats de contrôle et normes
Marque de contrôle | CE (Medical Device Directive), IEC/EN60601-1, EN60950-1, CAN/CSA C22.2 No. 60601-1-08, UL60601-1, FCC-B, RCM, RoHS, China RoHS, WEEE, CCC |
Garantie
Garantie | 3 ans |
Contenu de la livraison
Contenu de la livraison | Câble d'alimentation (connecteur CH), Câble vidéo (DVI-D – DVI-D), Télécommande, Utility Disk (instructions d'emploi PDF) |
